Jaw & Jaw

•  End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.
•  Hot Dip galvanized steel.
•  TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
•  Forged jaw ends are fitted with bolts and nuts for 1/4”  through 5/8”,  and pins and cotters on 3/4”  through 2-3/4”  sizes.
•  Modified UNJ thread on end fittings for improved fatigue properties.
•  Body has UNC threads.
•  Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements.  Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
•  Lock Nuts available for all sizes (see page 178).
•  Comprehensive end fitting data provided on page 176.
•  Fatigue Rated.

Diameter & Takeup Open Length Closed Length Working Load Limit (lbs) Weight (lbs)
1/4 X 4 12.18 8.18 500 0.36
5/16 X 4 1/2 14.12 9.62 800 0.52
3/8 X 6 17.50 11.50 1200 0.81
1/2 X 6 20.14 14.14 2200 1.56
1/2 X 9 26.43 17.43 2200 1.74
1/2 X 12 32.43 20.43 2200 2.40
5/8 X 6 21.82 15.82 3500 2.72
5/8 X 9 28.16 19.16 3500 3.43
5/8 X 12 34.16 22.16 3500 3.91
3/4 X 6 23.68 17.68 5200 4.11
3/4 X 9 30.08 21.08 5200 5.46
3/4 X 12 36.08 24.08 5200 6.56
3/4 X 18 50.09 30.08 5200 8.03
7/8 X 12 27.18 25.62 7200 8.17
1 X 12 39.18 27.18 10000 13.14
1 X 18 51.18 33.18 10000 15.14
1 X 24 63.78 39.78 10000 18.08
1 1/4 X 18 43.58 37.58 15200 24.68
1 1/4 X 24 55.58 44.14 15200 28.20
1 1/2 X 18 68.14 39.68 21400 41.60
1 1/2 X 24 45.68 46.30 21400 41.60
2 X 24 57.68 52.72 37000 94.25
2 1/2 X 24 82.18 58.18 60000 165.00
2 3/4 X 24 85.50 61.50 75000 198.00