Free Standing Jib Cranes

Floor Anchor Mount Free Standing Jib Cranes – Type J7TA

Used where overhead cranes are not practical or feasible. Gives full 360 degree coverage allowing unrestricted load movement.

Base Mounted Model Free Standing jib cranes
Full Circle Jib Crane designed for easy installation, minimal maintenance requirements, and years of trouble free service.

Foundation Mounted Model Free Standing jib cranes
This unit is selected when bottom base & gusset plates interfere with cranes placement.
Note: Capacities to 5 tons.

Sleeve Mounted Model Free Standing jib cranes
This unit is selected if the cranes removal is an important factor.
Note: Capacities to 5 tons.

Product Features:

Spans and height combination’s from 8’-20’.
360° rotation (when not obstructed).
Design allows for easy rotation, even under full load.
Units are fully self-supporting (must be anchored to specified foundation).
Conforms to AISC, OSHA and CMAA standards

Heavy duty design Free Standing jib cranes with many quality features:

Two roller design with articulated roller housing provides easy, precise rotation while reducing concentrated roller pressure on the pipe for most “normal” industrial applications.
Jib head is designed for exact bearing alignment for trouble-free installations and “friction-free” rotation. Adjustable rollers insure proper boom leveling.
End stops provide a positive hoist/trolley stop, and allows for maximum in trolley travel.
Optional hoist/trolley packages available.

All cranes have been designed to accept a kit for powered rotation either with the initial order or at a later date.

Tension & Cantilevered Freestanding Jib Cranes

Mast Type Free Standing Jib Cranes – Type J10, j11

Low headroom design.
Imposes less force than column mounted solutions.
Span and height combinations from 8’-20’.
Capacities to 5 tons.
360° rotation when not obstructed.
Simple four hole base plates for easy installation.
Bolted connections.
Very easily adjusted (if out of plum).
Free Standing jib cranes Conform to applicable standards.

Floor Anchor Mount Free Standing Jib Cranes – Type J7TA

Part Number	Height Under Jib Arm (ft)	Jib Arm Length -Span (ft)	Pipe OD (in)	Overall Height	Flange Width (in)	Weight (lbs)	Foundation Type
A360-1/4-8/8	8	8	8-5/8	8’6-1/4″	4	855	Type A 4′ X 4′ 3′ Deep
A360-1/4-8/10	8	10	8-5/8	8’6-1/4″	4	885
A360-1/4-8/12	8	12	8-5/8	8’6-1/4″	4	905
A360-1/4-8/14	8	14	12-3/4	8’8-1/4″	5-1/4	1285	Type C 5′ X 5′ 3′ Deep
A360-1/4-8/16	8	16	12-3/4	8’8-1/4″	5-1/4	1327
A360-1/4-8/18	8	18	12-3/4	8’10-3/8″	5-3/4	1495
A360-1/4-8/20	8	20	12-3/4	8’10-3/8″	5-3/4	1555
A360-1/4-10/8	10	8	8-5/8	10’6-1/4″	4	910	Type A 4′ X 4′ 3′ Deep
A360-1/4-10/10	10	10	8-5/8	10’6-1/4″	4	940
A360-1/4-10/12	10	12	8-5/8	10’6-1/4″	4	960
A360-1/4-10/14	10	14	12-3/4	10’8-1/4″	5-1/4	1350	Type C 5′ X 5′ 3′ Deep
A360-1/4-10/16	10	16	12-3/4	10’8-1/4″	5-1/4	1390
A360-1/4-10/18	10	18	12-3/4	10’10-3/8″	5-3/4	1560
A360-1/4-10/20	10	20	12-3/4	10’10-3/8″	5-3/4	1620
A360-1/4-12/8	12	8	8-5/8	12’6-1/4″	4	965	Type A 4′ X 4′ 3′ Deep
A360-1/4-12/10	12	10	8-5/8	12’6-1/4″	4	995
A360-1/4-12/12	12	12	12-3/4	12’6-1/4″	4	1285
A360-1/4-12/14	12	14	12-3/4	12’8-1/4″	5-1/4	1415	Type C 5′ X 5′ 3′ Deep
A360-1/4-12/16	12	16	12-3/4	12’8-1/4″	5-1/4	1455
A360-1/4-12/18	12	18	12-3/4	12’10-3/8″	5-3/4	1625
A360-1/4-12/20	12	20	12-3/4	12’10-3/8″	5-3/4	1685
A360-1/4-14/8	14	8	8-5/8	14’6-1/4″	4	1020	Type A 4′ X 4′ 3′ Deep
A360-1/4-14/10	14	10	8-5/8	14’6-1/4″	4	1050
A360-1/4-14/12	14	12	12-3/4	14’6-1/4″	4	1350
A360-1/4-14/14	14	14	12-3/4	14’8-1/4″	5-1/4	1480	Type C 5′ X 5′ 3′ Deep
A360-1/4-14/16	14	16	12-3/4	14’8-1/4″	5-1/4	1520
A360-1/4-14/18	14	18	12-3/4	14’10-3/8″	5-3/4	1690
A360-1/4-14/20	14	20	14	14’10-3/8″	5-3/4	2095
A360-1/4-16/8	16	8	8-5/8	16’6-1/4″	4	1080	Type A 4′ X 4′ 3′ Deep
A360-1/4-16/10	16	10	8-5/8	16’6-1/4″	4	1110
A360-1/4-16/12	16	12	12-3/4	16’6-1/4″	4	1420
A360-1/4-16/14	16	14	12-3/4	16’8-1/4″	5-1/4	1550	Type C 5′ X 5′ 3′ Deep
A360-1/4-16/16	16	16	12-3/4	16’8-1/4″	5-1/4	1590
A360-1/4-16/18	16	18	12-3/4	16’10-3/8″	5-3/4	1760
A360-1/4-16/20	16	20	14	16’10-3/8″	5-3/4	2185
A360-1/4-18/8	18	8	8-5/8	18’6-1/4″	4	1135	Type A 4′ X 4′ 3′ Deep
A360-1/4-18/10	18	10	8-5/8	18’6-1/4″	4	1165
A360-1/4-18/12	18	12	12-3/4	18’6-1/4″	4	1485
A360-1/4-18/14	18	14	12-3/4	18’8-1/4″	5-1/4	1615	Type C 5′ X 5′ 3′ Deep
A360-1/4-18/16	18	16	14	18’8-1/4″	5-1/4	2050
A360-1/4-18/18	18	18	14	18’10-3/8″	5-3/4	2220
A360-1/4-18/20	18	20	14	18’10-3/8″	5-3/4	2280
A360-1/4-20/8	20	8	8-5/8	20’6-1/4″	4	1190	Type A 4′ X 4′ 3′ Deep
A360-1/4-20/10	20	10	8-5/8	20’6-1/4″	4	1220
A360-1/4-20/12	20	12	12-3/4	20’6-1/4″	4	1550
A360-1/4-20/14	20	14	12-3/4	20’8-1/4″	5-1/4	2100	Type C 5′ X 5′ 3′ Deep
A360-1/4-20/16	20	16	14	20’8-1/4″	5-1/4	2140
A360-1/4-20/18	20	18	14	20’10-3/8″	5-3/4	2310
A360-1/4-20/20	20	20	16	20’10-3/8″	5-3/4	3070
A360-1/2-8/8	8	8	8-5/8	8’6-1/4”	4	855	Type A 4’ X 4’ 3’ Deep
A360-1/2-8/10	8	10	8-5/8	8’6-1/4”	4	885
A360-1/2-8/12	8	12	12-3/4	8’8-1/4”	5-1/4	1200
A360-1/2-8/14	8	14	12-3/4	8’8-1/4”	5-1/4	1285	Type C 5’ X 5’ 3’ Deep
A360-1/2-8/16	8	16	12-3/4	8’10-3/8”	5-3/4	1450
A360-1/2-8/18	8	18	12-3/4	8’10-3/8”	5-3/4	1495
A360-1/2-8/20	8	20	12-3/4	9’0-1/2”	6-1/2	1690
A360-1/2-10/8	10	8	8-5/8	10’6-1/4”	4	910	Type A 4’ X 4’ 3’ Deep
A360-1/2-10/10	10	10	8-5/8	10’6-1/4”	4	940
A360-1/2-10/12	10	12	12-3/4	10’8-1/4”	5-1/4	1265
A360-1/2-10/14	10	14	12-3/4	10’8-1/4”	5-1/4	1350	Type C 5’ X 5’ 3’ Deep
A360-1/2-10/16	10	16	12-3/4	10’10-3/8”	5-3/4	1515
A360-1/2-10/18	10	18	12-3/4	10’10-3/8”	5-3/4	1565
A360-1/2-10/20	10	20	14	11’0-1/2”	6-1/2	2055
A360-1/2-12/8	12	8	8-5/8	12’6-1/4”	4	965	Type A 4’ X 4’ 3’ Deep
A360-1/2-12/10	12	10	12-3/4	12’6-1/4”	4	1260
A360-1/2-12/12	12	12	12-3/4	12’8-1/4”	5-1/4	1330
A360-1/2-12/14	12	14	12-3/4	13’0-1/2”	6-1/2	1640	Type C 5’ X 5’ 3’ Deep
A360-1/2-12/16	12	16	12-3/4	13’0-1/2”	6-1/2	1700
A360-1/2-12/18	12	18	14	13’4-1/8”	7	2300
A360-1/2-12/20	12	20	14	13’4-1/8”	7	2400
A360-1/2-14/8	14	8	8-5/8	14’6-1/4”	4	1020	Type A 4’ X 4’ 3’ Deep
A360-1/2-14/10	14	10	12-3/4	14’6-1/4”	4	1330
A360-1/2-14/12	14	12	12-3/4	14’10-3/8”	5-3/4	1545
A360-1/2-14/14	14	14	12-3/4	15’0-1/2”	6-1/2	1705	Type C 5’ X 5’ 3’ Deep
A360-1/2-14/16	14	16	12-3/4	15’0-1/2”	6-1/2	1765
A360-1/2-14/18	14	18	14	15’4-1/8”	7	2395
A360-1/2-14/20	14	20	14	15’4-1/8”	7	2495
A360-1/2-16/8	16	8	8-5/8	16’4-1/4”	4	1070	Type A 4’ X 4’ 3’ Deep
A360-1/2-16/10	16	10	12-3/4	16’4-1/4”	4	1395
A360-1/2-16/12	16	12	12-3/4	16’10-3/8”	5-3/4	1610
A360-1/2-16/14	16	14	12-3/4	17’0-1/2”	6-1/2	1770	Type C 5’ X 5’ 3’ Deep
A360-1/2-16/16	16	16	14	17’0-1/2”	6-1/2	2205
A360-1/2-16/18	16	18	14	17’4-1/8”	7	2485
A360-1/2-16/20	16	20	16	17’4-1/8”	7	3220
A360-1/2-18/8	18	8	8-5/8	18’6-1/4”	4	1135	Type A 4’ X 4’ 3’ Deep
A360-1/2-18/10	18	10	12-3/4	18’6-1/4”	4	1460
A360-1/2-18/12	18	12	12-3/4	18’10-3/8”	5-3/4	1675
A360-1/2-18/14	18	14	14	19’0-1/2”	6-1/2	2230	Type C 5’ X 5’ 3’ Deep
A360-1/2-18/16	18	16	14	19’0-1/2”	6-1/2	2300
A360-1/2-18/18	18	18	16	19’4-1/8”	7	3255
A360-1/2-18/20	18	20	16	19’4-1/8”	7	3345
A360-1/2-20/8	20	8	8-5/8	20’6-1/4”	4	1190	Type A 4’ X 4’ 3’ Deep
A360-1/2-20/10	20	10	12-3/4	20’6-1/4”	4	1525
A360-1/2-20/12	20	12	14	20’10-3/8”	5-3/4	2170
A360-1/2-20/14	20	14	14	21’0-1/2”	6-1/2	2320	Type C 5’ X 5’ 3’ Deep
A360-1/2-20/16	20	16	14	21’0-1/2”	6-1/2	2390
A360-1/2-20/18	20	18	16	21’4-1/8”	7	3380
A360-1/2-20/20	20	20	16	21’4-1/8”	7	3470
A360-1-8/8	8	8	12-3/4	8’8-1/4”	5-1/4	1135	Type D – 5’ X 5’ 4’ Deep
A360-1-8/10	8	10	12-3/4	8’8-1/4”	5-1/4	1215	Type D – 5’ X 5’ 4’ Deep
A360-1-8/12	8	12	12-3/4	8’10-3/8”	5-3/4	1350	Type E – 6’ X 6’ 4’ Deep
A360-1-8/14	8	14	14	9’0-1/2”	6-1/2	1765	Type E – 6’ X 6’ 4’ Deep
A360-1-8/16	8	16	14	9’0-1/2”	6-1/2	1825	Type F – 7’ X 7’ 4’ Deep
A360-1-8/18	8	18	14	9’4-1/8”	7	2110
A360-1-8/20	8	20	14	9’4-1/8”	7	2195
A360-1-10/8	10	8	12-3/4	10’8-1/4”	5-1/4	1205	Type D – 5’ X 5’ 4’ Deep
A360-1-10/10	10	10	12-3/4	10’8-1/4”	5-1/4	1280	Type D – 5’ X 5’ 4’ Deep
A360-1-10/12	10	12	12-3/4	10’10-3/8”	5-3/4	1415	Type E – 6’ X 6’ 4’ Deep
A360-1-10/14	10	14	14	11’0-1/2”	6-1/2	1855	Type E – 6’ X 6’ 4’ Deep
A360-1-10/16	10	16	14	11’0-1/2”	6-1/2	1920	Type F – 7’ X 7’ 4’ Deep
A360-1-10/18	10	18	14	11’4-1/8”	7	2205
A360-1-10/20	10	20	14	11’4-1/8”	7	2290
A360-1-12/8	12	8	12-3/4	12’8-1/4	5-1/4	1205	Type D – 5’ X 5’ 4’ Deep
A360-1-12/10	12	10	12-3/4	12’8-1/4	5-1/4	1280	Type D – 5’ X 5’ 4’ Deep
A360-1-12/12	12	12	14	12’10-3/8”	5-3/4	1415	Type E – 6’ X 6’ 4’ Deep
A360-1-12/14	12	14	14	13’0-1/2”	6-1/2	1855	Type E – 6’ X 6’ 4’ Deep
A360-1-12/16	12	16	16	13’0-1/2”	6-1/2	1920	Type F – 7’ X 7’ 4’ Deep
A360-1-12/18	12	18	16	13’4-1/8”	7	2205
A360-1-12/20	12	20	16	13’4-1/8”	7	2290
A360-1-14/8	14	8	12-3/4	14’8-1/4”	5-1/4	1335	Type D – 5’ X 5’ 4’ Deep
A360-1-14/10	14	10	12-3/4	14’8-1/4”	5-1/4	1410	Type D – 5’ X 5’ 4’ Deep
A360-1-14/12	14	12	14	14’10-3/8”	5-3/4	1885	Type E – 6’ X 6’ 4’ Deep
A360-1-14/14	14	14	14	15’0-1/2”	6-1/2	2040	Type E – 6’ X 6’ 4’ Deep
A360-1-14/16	14	16	16	15’0-1/2”	6-1/2	2700	Type F – 7’ X 7’ 4’ Deep
A360-1-14/18	14	18	18	15’4-1/8”	7	3325
A360-1-14/20	14	20	18	15’4-1/8”	7	3410
A360-1-16/8	16	8	12-3/4	16’8-1/4”	5-1/4	1400	Type D – 5’ X 5’ 4’ Deep
A360-1-16/10	16	10	12-3/4	16’8-1/4”	5-1/4	1480	Type D – 5’ X 5’ 4’ Deep
A360-1-16/12	16	12	14	16’10-3/8”	5-3/4	1980	Type E – 6’ X 6’ 4’ Deep
A360-1-16/14	16	14	16	17’0-1/2”	6-1/2	2760	Type E – 6’ X 6’ 4’ Deep
A360-1-16/16	16	16	18	17’0-1/2”	6-1/2	3180	Type F – 7’ X 7’ 4’ Deep
A360-1-16/18	16	18	18	17’4-1/8”	7	3460
A360-1-16/20	16	20	18	17’4-1/8”	7	3550
A360-1-18/8	18	8	12-3/4	18’8-1/4”	5-1/4	1465	Type D – 5’ X 5’ 4’ Deep
A360-1-18/10	18	10	14	18’8-1/4”	5-1/4	1940	Type D – 5’ X 5’ 4’ Deep
A360-1-18/12	18	12	16	18’10-3/8”	5-3/4	2735	Type E – 6’ X 6’ 4’ Deep
A360-1-18/14	18	14	16	19’0-1/2”	6-1/2	2885	Type E – 6’ X 6’ 4’ Deep
A360-1-18/16	18	16	18	19’0-1/2”	6-1/2	3320	Type F – 7’ X 7’ 4’ Deep
A360-1-18/18	18	18	18	19’4-1/8”	7	3600
A360-1-18/20	18	20	18	19’4-1/8”	7	3690
A360-1-20/8	20	8	12-3/4	20’8-1/4”	5-1/4	1530	Type D – 5’ X 5’ 4’ Deep
A360-1-20/10	20	10	14	20’8-1/4”	5-1/4	2030	Type D – 5’ X 5’ 4’ Deep
A360-1-20/12	20	12	16	20’10-3/8”	5-3/4	2860	Type E – 6’ X 6’ 4’ Deep
A360-1-20/14	20	14	18	21’0-1/2”	6-1/2	3400	Type E – 6’ X 6’ 4’ Deep
A360-1-20/16	20	16	18	21’0-1/2”	6-1/2	3460	Type F – 7’ X 7’ 4’ Deep
A360-1-20/18	20	18	20	21’4-1/8”	7	4590
A360-1-20/20	20	20	20	21’4-1/8”	7	4680

Hercules SLR is part of the Hercules Group of Companies which offers a unique portfolio of businesses nationally with locations from coast to coast. Our companies provide an extensive coverage of products and services that support the success of a wide range of business sectors across Canada including the energy, oil & gas, manufacturing, construction, aerospace, infrastructure, utilities, oil and gas, mining and marine industries.

Hercules Group of Companies is comprised of: Hercules SLR, Hercules Machining & Millwright Services, Spartan Industrial Marine, Stellar Industrial Sales and Wire Rope Atlantic.

We have the ability to provide any solution your business or project will need. Call us today for more information. 1-877-461-4876 or email sales@herculesslr.com. Don’t forget to follow us on Facebook, Twitter and LinkedIn for more news and upcoming events.