Accessing a confined space takes planning to ensure that everyone who enters, exits and works in the space can do so safely. Read on for tips from 3M on how-to prepare for confined space access.
By the time you are accessing the confined space, a hazard assessment has been completed, but if not, one needs to be conducted to ensure all hazards have been identified. This thorough review will help you identify the right equipment to access the confined space properly. It also is essential to have proper training that will allow you to understand and identify the risks associated with this specific kind of work and then mitigate these risks and hazards effectively. Finally, before any work can begin, air quality should be tested to make sure the conditions are suitable for entry.
As you can see, there is a lot of planning and steps that must be conducted before accessing a confined space on your job site. This includes making sure that you have identified a primary point of contact and resource for issues pertaining to confined space entry. Often this may be the HSE management as well as the supervisor. Let’s explore some of the steps to take before accessing any confined space on your job site.
Confined Space Access | Hazard Assessment
Every single time a confined space is going to be accessed, you need to review the risk assessment for that space and validate that there aren’t new risks or hazards because of the work being done or events happening around the space. This reassessment ensures the workers entering the space will be protected properly based on these current conditions. The conditions often change and, therefore, this assessment should be constantly updated. This may include a variety of issues, such as unsafe levels of gas requiring respiratory protection, the presence of flammable substances, loud noises requiring hearing protection, and control of all energy sources (lock-out/tag-out).
This part of planning should also include a pre-work (or pre-access) briefing. During this part of the preparation, all the work, the time it will take, and emergency protocols that may be needed should be reviewed so everyone is on the same page.
Confined Space Access | Air Monitoring
Prior to any confined space entry, you are required to carry out air testing when it is known (e.g. from information on a previous hazard assessment or chemicals used in a previous activity in the space) that the atmosphere in the confined space might be contaminated or to any extent unsafe to breathe. Gas detection instruments should be checked to make sure they are working properly per product user instructions.
Most confined space air monitoring is accomplished using a four-gas analyzer. This checks the atmosphere for oxygen concentration and to determine the presence of various hazardous fumes, gases, vapors and particulates. Based on your hazard assessment, there may be a need for gas-specific monitors to determine lower-level concentrations that may be present.
Confined Space Access | Equipment Needed for Access
Without the proper equipment and training, safety and efficiency may be compromised and rescuing someone may be delayed if a problem does arise.
The key people involved in entries into confined spaces are the entrant, attendant, supervisor and rescue teams. All these participants require thorough training on the right equipment to minimize the risk of injury. Rescue plans that outline each step regarding how to work in the space and how to react if a problem occurs must be in place and be well-known by all parties in order to minimize the time required in case the need to rescue, remove or retrieve is needed.
Now think about it this way – this is how you can be prepared if you think it through:
The various types of confined spaces may all have different access points, involving vertical or horizontal entry and these will require different access equipment. Examples include a tripod, davit, pole hoist, side entry system, winch, and SRL retrieval. Having the right equipment in good working order and proper training on how to use these solutions for entrants can help prevent risk and in some instances, prevent the need for anyone else to enter if a rescue does become necessary.
The equipment used for access can be your initial rescue equipment. However, for certain entries, rescue teams may want specialized equipment, which should be available nearby during access work and be in good working order. Inspecting this equipment and making sure the rescue team is trained on rescue procedures and how to use this equipment is vital. They also should be trained in resuscitation procedures in the case that becomes necessary. Reviewing a rescue plan before anyone accesses the space should also be a part of your plan.
Confined Space Access | Additional Tips for Accessing a Confined Space
Besides conducting a thorough hazard assessment, air monitoring and making sure the right equipment is being used correctly, here are some additional steps you should keep in mind when conducting confined space work:
- All entrants for permit and non-permit work, as a best practice, should wear a full body harness. The harness should be designed for the intended use in the space.
- Authorized entrants who enter a permit space must wear a chest or full body harness with a retrieval line attached to the center of their backs near shoulder level or above their heads connected to a fixed point outside the permit space. The best practice is that the other end of the retrieval line is attached to a mechanical advantage device.
- Permit spaces greater than five feet deep require a pre-rigged retrieval system with mechanical advantage. It is very important that users be trained on the use of the retrieval system. However, always consider a mechanical advantage regardless of the depth of the confined space.
- All individuals have the authority to stop work for any confined space entry where they observe that the requirements of the safety program that the job site has put in place are not being followed correctly. This includes the attendant, entrant and supervisor.
- The confined space attendant who will be present outside the space the whole time while workers access and work inside should be able to maintain some sort of communication with the workers inside the space. Because the people inside the space may not be visible, other means of communication (such as an electronic voice communication system) should be considered.
Once the work is completed, everyone should review what worked well, inspect all the equipment used to see what needs repairs or should be replaced. You should also update the risk assessment with your findings for future workers who may need to access the space.
There is a lot to consider when accessing confined spaces. If you’re not sure where to start, call your local Hercules SLR and book your fall protection demo now. We’ll show you the 3M fall protection equipment we’re loving right now for confined space access, how to use it and the right equipment for you.
ORIGINAL ARTICLE VIA 3M HERE
BOOK YOUR FALL PROTECTION DEMO NOW
SHOW & TELL ISN’T JUST FOR KIDS—HERCULES SLR WILL SHOW YOU HOW 3M EQUIPMENT WORKS AND KEPPS YOU SAFE
FOR RELATED ARTICLES
VISIT OUR BLOG:
STAY IN THE LOOP—FOLLOW US
Hercules SLR is part of the Hercules Group of Companies. We have a unique portfolio of businesses nationally, with locations coast-to-coast. Hercules Group of Companies provides extensive coverage of products and services that support a variety of sectors across Canada which includes the energy, oil & gas, manufacturing, construction, aerospace, infrastructure, utilities, mining and marine industries.
We have the ability to provide any hoisting solution your business or project will need. Call us today for more information. 1-877-461-4876 or email firstname.lastname@example.org. Don’t forget to follow us on Facebook, Twitter and LinkedIn for more news and upcoming events.