roundsling

Synthetic roundslings are an integral part of heavy-lifting and rigging. Similarly, proper sling inspection is integral to ensure the job is done safely and properly.

Read on to find out how to inspect your roundslings for use.

Look and Feel for Damage

Most damage to a roundsling can be found simply by looking. However, internal damage can be present as well. Inspect for internal damage by feeling along the slings’ entire length.

Minor Damage Causes Major Incidents  

Damage to a roundsling may seem minor or small, yet this can drastically reduce its ability to lift or hold heavy loads.  This increases its risk of breaking during use−which can result in large costs, damaged material and most importantly, injured people.

In reality, no damage to a roundsling is minor−if damage is present, it should not be used.

What Should Operators Look and Feel for?

–        Missing Identification tag;

–        Holes, cuts, tears, snags that expose core yarn, excessive abrasive wear;

–        Broken or damaged yarn core;

–        One or more knots are tied to roundsling;

–        Acid or caustic burns of roundsling;

–        Melting, charring or weld spatter of any part of roundsling;

–        Distortion, excessive pitting, corrosion or other damages to fitting(s);

–        Broken or worn stitching in the cover which exposes the core yarn;

–        Any conditions that cause you to doubt the roundslings’ strength.

Inspection-of-Synthetic-Slings
Click on the above image to download our Synthetic Sling Inspection Guide
I’ve Found Damage−Now What?

If any damage is found, pictured above or otherwise, the sling must be removed from service. When removed, the sling must be completely destroyed, and must be made unusable for future use. If it’s repairable, it must be proof-tested by the roundsling’s manufacturer or another qualified tester.

 

Frayed Sling

 

Sling damage should never be temporarily repaired.

Synthetic roundslings are an integral part of heavy-lifting and rigging−however, proper inspection is also necessary to ensure the job is done safely, and properly. Keep reading to find out how often to assess your roundslings before use.

Inspections—how often should I do this?

Roundsling inspection should use the following 3-step procedure, which ensures slings are inspected frequently enough. The stages are:

Initial Inspection

When your sling is received, a designated employee will ensure the correct sling has been received, is undamaged and that it meets requirements for use.

Frequent Inspection

The roundsling should be inspected before each shift, each day in normal service. When using for severe service application, the roundsling should be checked before each individual use.

Periodic Inspection

Every sling should be periodically inspected by a designated person. However, this inspection should be performed by someone who does not regularly inspect the sling. This provides an opportunity to find issues that previous inspections may have missed or overlooked.

Period inspections are based on how frequently used slings are, or how frequently you anticipate you will use them for. Other factors include the severity of conditions and what type of work the sling is used for. Inspections may also be based on slings used in the past under similar circumstances.

Generally, inspections should be done as follows:

  • Normal Service—yearly
  • Severe Service—monthly to quarterly
  • Special Service—as recommended by a qualified person

Intervals between inspection should never exceed one year. Written records are not required for frequent inspections, however written records should be kept. The WSTDA, RS-1 and ASME B30.9 require written record of the latest inspection.

————————————————————————————————————————————————————

Hercules SLR is part of the Hercules Group of Companies which offers a unique portfolio of businesses nationally with locations from coast to coast. Our companies provide an extensive coverage of products and services that support the success of a wide range of business sectors across Canada including the energy, oil & gas, manufacturing, construction, aerospace, infrastructure, utilities, oil and gas, mining and marine industries.

Hercules Group of Companies is comprised of: Hercules SLRHercules Machining & Millwright ServicesSpartan Industrial MarineStellar Industrial Sales and Wire Rope Atlantic.

We have the ability to provide any solution your business or project will need. Call us today for more information. 1-877-461-4876. Don’t forget to follow us on Twitter, LinkedIn and Facebook for more news and upcoming events.