IMPORTANT | Inspection Notice – 3M™ DBI-SALA® ExoFit NEX™ Harnesses

3m dbi-sala and protecta logo

3M Fall Protection Logo

 

 

3M INSPECTION NOTICE

Read on for an important 3M Fall Protection inspection notice – 3M Fall Protection has learned of the possibility of a manufacturing defect in a dorsal d-ring of ExoFit NEX™ harnesses manufactured between January 2016 and December 2018. Although there have been no reported incidents involving this condition, a dorsal d-ring with this defect will not support the load in a fall arrest event which could result in serious injury or death. Harnesses manufactured only within this date range require immediate inspection for lot number 09P1 stamped into a dorsal d-ring. We believe that only one harness was manufactured with a defective D-ring, but we urge inspection of all potentially affected harnesses out of an abundance of caution in the interests of worker safety.

End Users: Upon receipt of this inspection Notice, immediately inspect your harness following the steps below:

3M INSPECTION NOTICE STEP 1: Locate the label pack on the harness to identify the manufacturing date. If the harness has a manufacturing date of 16/01 (2016, January) through the end of 18/12 (2018, December), continue to step 2. If the harness is not in this range, the unit is not impacted by this notice. If the harness is within this date range, continue to step 2.

3M INSPECTION NOTICE STEP 2: Locate the D-ring on the back of the harness to inspect for a stamped lot date of 09P1. If you find a D-ring with code 09P1 and the harness has a manufactured date within the affected date range, take the harness out of service immediately. If the D-ring is not stamped with code 09P1, you may continue using your harness.

Please note that both the manufactured date range (2016, January through 2018, December) on the harness label AND the lot number code 09P1 stamped on the D-ring must be present on the same harness for the harness to be considered suspect and removed from service. All other harness/d-ring combinations are acceptable for use.

End-users: If you find an affected harness, take the unit out of service immediately. You can contact us at 3M Customer Service at 1833-998-2243 or at 3MCAFPServiceAction@mmm.com to return your harness and a replacement harness will be provided free of charge.

Distributors: Please contact our Customer Service department at 1-833-998-2243 or email at 3MCAFPServiceAction@mmm.com to obtain a listing of harnesses sold to you with the affected manufacturing date range. If after inspection you discover you have an affected product in stock, please return the harnesses to 3M Fall Protection immediately for replacement. Please immediately forward this Inspection Notice to any of your customers who have purchased ExoFit NEX product within the affected manufacturing date range from you and provide any assistance requested by your customers to complete the process.

3M remains committed to providing quality products and services to our customers. We apologize for any inconvenience that this situation may cause you or your customers. We appreciate your continued support of 3M Fall Protection products and services.


STAY IN THE LOOP—FOLLOW US

FACEBOOK LINKEDIN  TWITTER INSTAGRAM YOUTUBE


Hercules SLR is part of the Hercules Group of Companies. We have a unique portfolio of businesses nationally, with locations coast-to-coast. Hercules Group of Companies provides extensive coverage of products and services that support a variety of sectors across Canada which includes the energy, oil & gas, manufacturing, construction, aerospace, infrastructure, utilities, mining and marine industries. 

Hercules Group of Companies is comprised of: Hercules SLRHercules Machining & Millwright ServicesSpartan Industrial MarineStellar Industrial Sales and Wire Rope Atlantic.

We have the ability to provide any hoisting solution your business or project will need. Call us today for more information. 1-877-461-4876 or email info@herculesslr.com

Don’t Believe Us—Just Watch: Book your 3M Fall Protection Demo

3m fall protection gear for tools

NEW! 3M Fall Protection Demo Bag 

Hercules SLR knows the value of fall prevention—That’s why we’ve put together kits with some of our favourite 3M fall protection gear to show you the difference it makes. 

3M FALL PROTECTION | WHY IS FALL PREVENTION IMPORTANT? 

In Canada, every year over 14,000 workers are injured due to falls and over 27,000 workers are injured due to dropped objects like hammers, cell phones and work-radios—These are just the recorded incidents. 

Fall protection for all kinds of workers should include the right kind of PPE for the kind of work you do, but prevention plans, rescue & retrieval plans and tool fall protection equipment, plans and risk assessment measures. 

3M FALL PROTECTION FOR TOOLS | STOP THE DROP

It can be easy to underestimate the impact of slips and falls—It can be even easier to underestimate the impact of dropped tools and equipment, so it’s important to take preventative steps to eliminate the risk of injury. 

Often, tools fall from heights due to poor risk assessment & planning, human error, poorly stored tools and fixtures & fittings on-site that have failed. Since tools are often dropped by accident, focus should be on preventing these incidents from happening at all.

Tool fall protection normally focuses on secondary protective measures, like safety nets and toe boards, but it’s rare that tool fall protection plans employ a primary system to prevent drops. These precautions are often taken after an accident or injury occurs. 

WHAT KIND OF DAMAGE DOES A DROPPED TOOL DO? 

There are two main kinds of incidents when tools fall—These are direct impact and deflection. Direct impact injuries happen when the dropped object hits you directly on the head, and deflection happens when the tool bounces off another surface and strikes you. 

Let’s imagine a scenario—You’re working at heights, 200-feet (or 6-metres) above ground on scaffolding. You stop to check something, when your foot nudges the tape measure and it slides out and falls to the ground. 200-feet below. Even though the tape measure only weighs about 1.5lbs, it hits with a force of 3,750lbs. To put that in perspective, a hippo’s average weight is 3,300-4000lbs. 

This happened to a worker in New Jersey, who was delivering sheet metal to a work site when he was killed by a falling tape measure. Falling objects pose risk to the worker who drops it too, since the knee-jerk reaction is often to reach out and try to catch it which could cause you to slip and fall. 

Fall protection protects you from falls, while tool fall protection is designed to save others. We’ve covered comfortable fall protection equipment on the blog before and that it’s important to remember a safety harness isn’t a one-size fits all solution. Tool fall protection is the same.

Many workers find tool fall protection distractive and obtrusive—This is why it’s important to select a drop prevention system that’s comfortable and reasonable for workers to use. 

WHAT SHOULD MY PLAN INCLUDE? 

Your fall prevention plan should consider and plan to account for: 

  • Tool size & fit
  • Tool form & function
  • Attachment points for each tool (great starting point for tool protection) 
  • Drop-tests with attachment points, before used on the worksite 

3M FALL PROTECTION DEMO BAG | WHAT’S INSIDE?

3M fall protection, protecta vest-style harness at hercules securing, lifting and rigging
The 3M Protecta® Vest-Style Harness has back D-rings, tongue-buckle rings and pass-thru chest connections that give maximum comfort and protection.

 

3m protecta rebel SRL
The Protecta® Rebel Self-Retracting Lifeline (SRL, web) is compact, lightweight and has a swiveling anchorage with self-locking snap-hooks and fast-acting speed-sending brake system. It also has thermoplastic housing for extra agility and protection.
 
3m fall protection shock-absorbing lanyard
The 3M Twin-Leg Shock-Absorbing Lanyard has double-leg loops for 100% tie-off with convenient snap-hook and flat, steel rebar hooks at leg ends to keep you balanced in case you fall. 
3m fall protection dbi-sala harness
The 3M DBI-SALA® Vest-Style Harness has back D-ring and tongue-buckle leg straps, quick-connect and pass-through buckles with detachable shoulder padding that give ultimate comfort. It has an industrial-strength magnet that secures your items, even when tipped upside down.
 

3M SAFE BUCKET

3m fall protection demo safe bucket

The 3M safe bucket is your best friend for preventing dropped tools. 

The 3M Safe Bucket (100lb Load Rated Drawstring Canvas) includes: 

  • Adjustable Radio Holster (1500089)
  • Hard Hat Tether (1500178) 
  • Tool Lanyard, Coil Ether, 5lb. (2.3kg) capacity—Single-leg with self-locking carabiner with hooks at both ends. (1500063)
  • Python Canvas pouch (1500119) 

3M FALL PROTECTION DEMO BAG | BOOK YOUR DEMO NOW 

What’s a Fall Protection Demo, you ask? Book a fall protection demo with your local Hercules SLR branch and a representative will: 

  • Share the features & benefits of the 3M Fall Protection Demo Bag Products 
  • Show you how to use the tool fall protection attachment points 
  • Discuss your unique PPE needs based on your employees and type of work 

BOOK YOUR FALL PROTECTION DEMO NOW

SHOW & TELL ISN’T JUST FOR KIDS—HERCULES SLR WILL SHOW YOU HOW 3M EQUIPMENT  WORKS AND KEEP YOU SAFE

INFO@HERCULESSLR.COM 1-877-461-4877


FOR RELATED ARTICLES

VISIT OUR BLOG:

DON’T SLIP UP: FALL PROTECTION GLOSSARY

HERCULES’ TIPS: IS YOUR SAFETY HARNESS COMFORTABLE?

CONFINED SPACES: CHOOSE THE BEST FALL PROTECTION EQUIPMENT


STAY IN THE LOOP—FOLLOW US

FACEBOOK LINKEDIN TWITTER INSTAGRAM YOUTUBE


Hercules SLR is part of the Hercules Group of Companies. We have a unique portfolio of businesses nationally, with locations coast-to-coast. Hercules Group of Companies provides extensive coverage of products and services that support a variety of sectors across Canada which includes the energy, oil & gas, manufacturing, construction, aerospace, infrastructure, utilities, mining and marine industries. 

Hercules Group of Companies is comprised of: Hercules SLRHercules Machining & Millwright ServicesSpartan Industrial MarineStellar Industrial Sales and Wire Rope Atlantic.

We have the ability to provide any hoisting solution your business or project will need. Call us today for more information. 1-877-461-4876 or email info@herculesslr.com. Don’t forget to follow us on FacebookTwitter and LinkedIn for more news and upcoming events.