Hercules Machining & Millwright Services
Founded on a Reputation of Excellence Since 1975
Hercules MMS (formerly Fundy Grinding) has been providing industry with quality machining and millwright services since 1975. Over time, our company has grown from providing these services locally in Atlantic Canada to working across Canada and around the globe.
We have the equipment and the expertise to get the job done. All of our equipment is maintained, inspected, and can be customized to match any requirement.
From boring a small hole in a boom truck to complete maintenance shutdowns, we have the ability to bring our shop to yours. We can assist with all maintenance requirements.
Our commitment to quality workmanship is supported by our ISO certification, ensuring we meet customer expectations every time, whether the job is completed in our machine shop or on-site.
Machine Shop Services
General Machine Shop Repairs:
Electric motor end bell bearing fit repairs
Refurbishing bearing bores in large gearboxes
Rubber roller grinding
Teflon shrink sleeve installation
Roller manufacturing (steel and aluminum)
Surface grinding
Key way cutting
Spline cutting (straight sided and involute tooth cutting)
Custom design of replacement parts
Manufacture using stainless and carbon steel
2D custom injection mold manufacturing
Babbit bearing reconditioning
Stainless steel boat shaft repair and manufacturing
Spray weld repairs on shaft seal fit
Pump Repairs:
Reciprocating pumps
Multi stage deep well pumps
Milton Roy metering pumps
Portable hydraulic pumps
Multi stage boiler feed pumps
Fire pumps
Johnson vertical pumps
Gardener Duplex steam pumps
Dredge hydraulic pumps
Machine Shop Manufacturing:
Gears
Various sizes of shafts
Rollers (Steel & Aluminum – Up to 23’ long)
Specialized tooling
Rollers (Steel, Aluminum, Rubber)
Machine Shop Welding:
Spray welding (Both Rototec & Eutalloy)
Aluminum and Stainless Steel Welding
MIG Welding
TIG Welding
Brazing
Plazark shapes up to 1/4” thick
Boretech Welding
On-Site Machining Services
General On-Site Machining Services:
On-site machining supervision
Ability to work 24 hour shifts
Full document control with inspection records sheets, time sheet control
Costing updates as per customer requirements, daily or weekly
Can work as a stand-alone team or part of an integrated plant maintenance team
Full safety documentation available for job site use
In Situ
Services:
Flange resurfacing 5”-60” diameter
Pipe weld preps 5” to 60”
Pipe cut out and weld bevels 6” to 18”
Motor base and sole plate milling
Stud and bolt removal (including large diameter studs)
Onsite drilling and tapping. (holes up to 4” dia.)
Line boring services ( 1.5” diameter and up)
Large diameter boring (up to 60”diameter )
Larger boring can be done on a per job request ex. pump/turbine casings, blower housing, etc
Slip ring machining
In place shaft machining and repair
In place shaft keyway milling
Bore honing services
Fixed coupling bolt hole boring
Portable
Equipment:
Rigging and other lifting provisions
Standard steel stock
Millwright hand tooling
Additional machine equipment as needed
Millwright Services
Turbine repairs
Millwright supervision
Ability to work 24 hour shifts
Full document control with inspection records sheets, time sheet control
Ability to provide costing updates as per customer requirements, daily or weekly
Can work as a stand alone team or part of an integrated plant maintenance team
Full safety documentation available for job site use
Proud partner of the Millwright Local 1178
Complete machine shop facility to assist onsite machining preparation for mobilization and support during outages
Millwright support for turbine installations or repairs
Complete strip down and rebuilds on turbines and generators
Alignment of turbine and generator
Machining and replacing of valve studs
Valve and relay overhauls
Lifting of cylinders, cross over pipes, spindles, and rotor in and out of turbine
Bearing inspections and replacements
Hydrogen seal inspections and replacements
Alignment of pumps and commissioning
Boiler feed pump repairs
Force draft fan repairs
If you have any questions about our Hercules Machining & Millwright Services, please contact Arthur Lewis at 902-895-6911 or by email at: [email protected]
After Hours Coverage:
Our normal hours of operation are from Monday to Friday 8:00am to 5:00pm. But, we know that sometimes our customers can not predict when they will require our services. That’s why we provide a way to contact us outside of regular business hours. Customers that require machining or millwright services after hours can contact our on-call machinist at 902-890-4202.
Questions?
Let us know how we can help
17 Hercules SLR Branches Across Canada
Select your local branch for contact information & store hours
Get Your Directions
Use my location to find the closest Service Provider near me
The experts at Hercules Machining & Millwright Services (formerly Fundy Grinding) have been proudly serving Atlantic Canadian businesses since 1975