EYE BOLT 7/8X5 SHOULDER NUT GALV
Please note: images may not be exact representations. Always refer to manufacturer's specifications.
EYE BOLT 7/8X5 SHOULDER NUT GALV
$128.80
Forged steel, Quenched & Tempered. Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles. Working Load Limits shown are for in-line pull. For angle loading, see applications and warning section. Meets or exceeds all requirements of ASME B30.26, including identification, ductility, design factor, proof load, and temperature requirements. Importantly, these bolts meet other critical performance requirements, including fatigue life, impact properties, and material traceability not addressed by ASME B30.26. All bolts hot-dip galvanized after threading (UNC). Furnished with standard hot-dip galvanized, heavy hex nuts.
- BrandCrosby
- Diameter7/8"
- Shank Length5"
- Working Load Limit10600 LBS
Description
Forged steel, Quenched & Tempered. Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles. Working Load Limits shown are for in-line pull. For angle loading, see applications and warning section. Meets or exceeds all requirements of ASME B30.26, including identification, ductility, design factor, proof load, and temperature requirements. Importantly, these bolts meet other critical performance requirements, including fatigue life, impact properties, and material traceability not addressed by ASME B30.26. All bolts hot-dip galvanized after threading (UNC). Furnished with standard hot-dip galvanized, heavy hex nuts.