CLAMP 5 TONNE BEAM 4.75-13.75 JAW W/HOIS
Please note: images may not be exact representations. Always refer to manufacturer's specifications.
CLAMP 5 TONNE BEAM 4.75-13.75 JAW W/HOIS
$1,514.00
IPTK - 5t Beam Clamp w/Hoisting Eye 4 3/4-13 3/4" Jaw
• This IPTK series beam clamp is suitable for use as a temporary tackle eye for a beam.
• Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
• Individually Proof Tested to 2 times the Working Load Limit with certification.
• Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body.
• Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp.
• Maintenance and repair kits are available. • Design Factor based on EN 13155 and ASME B30.20.
- BrandCrosby
- Maximum Jaw Width13.75"
- Minimum Jaw Width4.75"
Description
IPTK - 5t Beam Clamp w/Hoisting Eye 4 3/4-13 3/4" Jaw
• This IPTK series beam clamp is suitable for use as a temporary tackle eye for a beam.
• Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
• Individually Proof Tested to 2 times the Working Load Limit with certification.
• Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body.
• Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp.
• Maintenance and repair kits are available.
• Design Factor based on EN 13155 and ASME B30.20.