CLAMP 1 TON VERTICAL 0-0.75" JAW STR EYE
![CLAMP 1 TON VERTICAL 0-0.75" JAW STR EYE](https://assets-9281e19bf8.cdn.insitecloud.net/1de694a1fede73e_md.png)
Please note: images may not be exact representations. Always refer to manufacturer's specifications.
CLAMP 1 TON VERTICAL 0-0.75" JAW STR EYE
$1,229.00
IP10/S - 1t Vertical Lifting Clamp w/Straight Eye For Stainless Steel Surfaces 0-3/4" Jaw
• For use with stainless steel material.
• Model IP10 available in 40t, 55t and 100t on request.
• Model IP10R (remote control opening and closing via a cable) available on request.
• Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
• Individually Proof Tested to 2 times the Working Load Limit with certification.
• Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body.
• Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual and test certificate included with each clamp.
• Full 180° turning range for material transfer, turning or moving.
• Lock open, lock closed ability with latch for pretension on material and then release of material.
• Maintenance and repair kits are available.
• Minimum WLL is 10% of maximum WLL.
• For plate surface hardness to 279HV10, only 5% minimum WLL is needed.
• Design Factor based on EN 13155 and ASME B30.20.
- BrandCrosby
- Maximum Jaw Width0.75"
- Minimum Jaw Width0"
Description
IP10/S - 1t Vertical Lifting Clamp w/Straight Eye For Stainless Steel Surfaces 0-3/4" Jaw
• For use with stainless steel material.
• Model IP10 available in 40t, 55t and 100t on request.
• Model IP10R (remote control opening and closing via a cable) available on request.
• Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
• Individually Proof Tested to 2 times the Working Load Limit with certification.
• Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body.
• Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual and test certificate included with each clamp.
• Full 180° turning range for material transfer, turning or moving.
• Lock open, lock closed ability with latch for pretension on material and then release of material.
• Maintenance and repair kits are available.
• Minimum WLL is 10% of maximum WLL.
• For plate surface hardness to 279HV10, only 5% minimum WLL is needed.
• Design Factor based on EN 13155 and ASME B30.20.