IPNM10N - 1t Non-Marring Lifting Clamp 0-3/4" Jaw • Welded alloy steel body for strength and smaller size. Forged alloy components, where required. • Individually Proof Tested to 2 times the Working Load Limit with certification. • Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body. • Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp. • Full 180° turning range for material transfer, turning or moving. • Lock open, lock closed ability with latch for pretension on material and then release of material. • Material must be clean and dry. • There is no minimum WLL required. • Maintenance replacement kits are available. • Temperature range -4° F to 158° F • Optional with brake pad lining for temperature range -40°F to +392°F • Special jaw openings or curved jaws upon request. • Design Factor based on EN 13155 and ASME B30.20.