CLAMP 1-1/2 TONNE MISC 0-1.25 NOT FOR LI
Please note: images may not be exact representations. Always refer to manufacturer's specifications.
CLAMP 1-1/2 TONNE MISC 0-1.25 NOT FOR LI
$889.00
IPSC10 - 1.5t Positioning Clamp 0-1 9/16" Jaw
• The IPSC10 screw style clamp is for positioning, pulling and turning plates or fabrications.
• Design Factor based on EN 13155 and ASME B30.20.
• Suitable for steel with a surface hardness up to 30 Rc.
• Forged alloy steel body for strength and smaller size. Forged alloy components, where required.
• Individually Proof Tested to 2 times the Working Load Limit with certification.
• Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body.
• Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp.
• Manufactured by an ISO 9001 facility. • Design Factor based on EN 13155 and ASME B30.20.
- BrandCrosby
- Maximum Jaw Width1.25"
- Minimum Jaw Width0"
Description
IPSC10 - 1.5t Positioning Clamp 0-1 9/16" Jaw
• The IPSC10 screw style clamp is for positioning, pulling and turning plates or fabrications.
• Design Factor based on EN 13155 and ASME B30.20.
• Suitable for steel with a surface hardness up to 30 Rc.
• Forged alloy steel body for strength and smaller size. Forged alloy components, where required.
• Individually Proof Tested to 2 times the Working Load Limit with certification.
• Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body.
• Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp.
• Manufactured by an ISO 9001 facility.
• Design Factor based on EN 13155 and ASME B30.20.