CLAMP 1 TONNE LIFTING VERTICAL 0-0.79 JA
![CLAMP 1 TONNE LIFTING VERTICAL 0-0.79 JA](https://assets-9281e19bf8.cdn.insitecloud.net/b66372c5beb1b26_md.png)
Please note: images may not be exact representations. Always refer to manufacturer's specifications.
CLAMP 1 TONNE LIFTING VERTICAL 0-0.79 JA
$2,035.00
IPNM10/P - .5t Non-Marring Vertical Lifting Clamp w/Protection Cap 0-.38" Jaw
• Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
• Individually Proof Tested to 2 times the Working Load Limit with certification.
• Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body.
• Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp.
• Full 180° turning range for material transfer, turning or moving.
• Lock open, lock closed ability with latch for pretension on material and then release of material.
• Material must be clean and dry.
• There is no minimum WLL required. • Maintenance replacement kits are available. • Temperature range -4° F to 158° F • Optional with brake pad lining for temperature range -40°F to +392°F • Special jaw openings or curved jaws upon request.
• Design Factor based on EN 13155 and ASME B30.20.
- BrandCrosby
- Maximum Jaw Width0.79"
- Minimum Jaw Width0"
Description
IPNM10/P - .5t Non-Marring Vertical Lifting Clamp w/Protection Cap 0-.38" Jaw
• Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
• Individually Proof Tested to 2 times the Working Load Limit with certification.
• Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body.
• Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp.
• Full 180° turning range for material transfer, turning or moving.
• Lock open, lock closed ability with latch for pretension on material and then release of material.
• Material must be clean and dry.
• There is no minimum WLL required.
• Maintenance replacement kits are available.
• Temperature range -4° F to 158° F
• Optional with brake pad lining for temperature range -40°F to +392°F
• Special jaw openings or curved jaws upon request.
• Design Factor based on EN 13155 and ASME B30.20.