CLAMP 1 TON LIFTING HORIZONTAL 0-1.38 JA
![CLAMP 1 TON LIFTING HORIZONTAL 0-1.38 JA](https://assets-9281e19bf8.cdn.insitecloud.net/f9a861be79140ff_md.jpg)
Please note: images may not be exact representations. Always refer to manufacturer's specifications.
CLAMP 1 TON LIFTING HORIZONTAL 0-1.38 JA
$771.00
IPH10 - 1t (Per Pair) Horizontal Lifting Clamp w/torsion spring 0-1.38" Jaw • The IPH10 horizontal lifting clamps with spring loaded tension have a pretension feature that allows the user to attach the clamps to the material for horizontal lifting and transfer of non-sagging material. These clamps must be used in pairs or more.
• Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
• Individually Proof Tested to 2 times the Working Load Limit with certification.
• Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body.
• Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp.
• Maintenance and repair kits are available. • Design Factor based on EN 13155 and ASME B30.20.
- BrandCrosby
- Maximum Jaw Width1.38"
- Minimum Jaw Width0"
Description
IPH10 - 1t (Per Pair) Horizontal Lifting Clamp w/torsion spring 0-1.38" Jaw
• The IPH10 horizontal lifting clamps with spring loaded tension have a pretension feature that allows the user to attach the clamps to the material for horizontal lifting and transfer of non-sagging material. These clamps must be used in pairs or more.
• Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
• Individually Proof Tested to 2 times the Working Load Limit with certification.
• Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body.
• Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp.
• Maintenance and repair kits are available.
• Design Factor based on EN 13155 and ASME B30.20.